Spike Driver

The CX Hammer can simultaneously drive up to two spikes per rail, for a total of four per tie, while the hydraulically operated spotting system allows fast alignment of the guns with the tie plate holes. The weight of the machine, as well as the load transfer inherent in the machine’s design, stabilizes the machine on the track, allowing both sides of the tie to be worked on at the same time. The large capacity spike trays hold up to 50 spikes each, allowing continuous spiking operations.

Spiking Hammers: Reciprocating hammers drive spikes with 2,200 lbs of downward force. Minimal bent spikes equals more efficiency while simultaneously reducing spike waste.
Secure Tie Plates: Tie nipper assembly grabs and pulls ties closer to the rail during the spiking process, thus insuring the tie plate is as firmly attached as possible.

Quick Adjust: Change gun spacing for different hole patterns and set the proximity switches for different rail heights, all from within the cab. Settings can be quickly switched for either welded or jointed rail.

Boom and Winch: Equipped with a 300 lbs winch, spike kegs can be quickly loaded onto the rear storage rack.

Cab: Seating for two spike operators and one feed tray operator.